Plena Power Amplifier BOSCH PLE‑1P240‑EU
Features
240 W power amplifier in a compact housing
1 V line level balanced input
70 V, 100 V and 8 ohm outputs
100 V input for slave operation on 100 V speaker line
Temperature-controlled forced front to back ventilation (directly stackable)
The PLE-1P240-EU are two high-power plug-and-play cost effective power amplifiers that deliver 240 Watts to constant voltage or 8 ohm loads. Built with premium quality and protections, they offer basic functionality at a budget price. The amplifiers offer straight 1 V and 100 V line in, and 70 V, 100 V and 8 ohms out. They can extend the power of the PLE- series mixer amplifiers or be combined with the PLE-10M2-EU mixer, or work anywhere where more power on an existing 100 V line is needed or when a line level signal is provided.
Electrical
Mains power supply
Voltage 115 – 230 VAC ±10%, 50/60 Hz)
Inrush Current 9/18 A (230/115 VAC)
Power consumption 760 VA
Battery power supply
Voltage 24 VDC, +10% / -15%
Current 11 A, Charge current 0.5 ADC
Charge float voltage 27.3 VDC
Power consumption
Max power (mains) 451 W, -6dB (mains) 244 W, Idle (mains) 16 W
Max power (24 V) 12 A (290 W), -6 dB (24 V) 8.1 A (194 W), Idle (24 V) 0.3 A (7 W)
Performance
Max / rated power 360 W / 240 W
Power reduction on backup power -1 dB
Frequency response 50 Hz to 20 kHz (+1/‑3 dB @ ‑10 dB ref. rated output)
Distortion <1% @ rated output power, 1 kHz Inputs Connector 1: 3-pin XLR, balanced Sensitivity 1 V , Impedance 20 kohm Connector 2 : 3-pin Euro style, balanced Sensitivity 100 V , Impedance 300 kohm Dynamic range 100 dB CMRR (mic) >40 dB (50 Hz to 20 kHz)
Loudspeaker outputs 70 V / 100 V
Connector Euro style pluggable screw terminals
Loudspeaker output 8 ohm
Connector Euro style pluggable screw terminals 44 V (240 W)
Mechanical
Dimensions (H x W x D): 100 x 430 x 270 mm (19″ wide, 2U high)
Mounting Stand-alone, 19″ rack
Color: Charcoal
Weight : Approx. 12.5 kg