Bosch Power PLE-1P120 plena 120 watt pa system

Bosch plena power amplifier booster ple-1p120-eu 120 watt pa system


Plena Power Amplifier BOSCH PLE‑1P120‑EU

120 W power amplifier in a compact housing
1 V line level balanced input
70 V, 100 V and 8 ohm outputs
100 V input for slave operation on 100 V speaker line
Temperature-controlled forced front to back ventilation (directly stackable)
The PLE-1P120-EU are high-power plug-and-play cost effective power amplifiers
that deliver 120Watts to constant voltage or 8 ohm loads. Built with premium quality and
protections, they offer basic functionality at a budgetprice. The amplifiers offer straight 1 V and 100 V line
in, and 70 V, 100 V and 8 ohms out. They can extendthe power of the PLE- series mixer amplifiers or be
combined with the PLE-10M2-EU mixer, or workanywhere where more power on an existing 100 V lineis needed or when a line level signal is provided.


Mains power supply
Voltage115 – 230 VAC ±10%,50/60 Hz
Inrush Current 4.5/9 A (230/115 VAC)
Power consumption 380 VA
Battery power supply
Voltage24 VDC, +10% / -15%
Current 5.5 A
Charge current0.5 ADC
Charge float voltage27.3 VDC

Power consumption
Max power (mains)227 W, -6dB (mains)130 W,Idle (mains)12 W
Max power (24 V),7 A (150 W),-6 dB (24 V),4.4 A (194 W),Idle (24 V)0.3 A (7 W)

Max / rated power 180 W / 120 W
Power reduction on backup power – 1 dB
Frequency response 50 Hz to 20 kHz (+1/‑3 dB @‑10 dB ref. rated output)
Distortion<1% @ rated output power,1 kHz Inputs Connector 1 : 3-pin XLR, balanced Sensitivity1 V ,Impedance20 kohm Connector 2:3-pin Euro style, balanced Sensitivity100 V, Impedance300 kohm Dynamic range100 dB CMRR (mic)>40 dB (50 Hz to 20 kHz)
Loudspeaker outputs 70 V / 100 V
ConnectorEuro style pluggable screwterminals
Loudspeaker output 8 ohm
ConnectorEuro style pluggable screwterminals31 V (120 W)

Dimensions (H x W x D):100 x 430 x 270 mm(19″ wide, 2U high)
Mounting:Stand-alone, 19″ rack
Weight :Approx. 10.5 kg

Shopping Cart